library(ClinicoPath)
#> Loading required package: acepack
#> Loading required package: askpass
#> Loading required package: assertthat
#> Loading required package: backports
#> Loading required package: base64enc
#> Loading required package: bayestestR
#> Loading required package: BH
#> Loading required package: blavaan
#> Loading required package: lavaan
#> This is lavaan 0.6-5
#> lavaan is BETA software! Please report any bugs.
#> Loading required package: Rcpp
#> This is blavaan 0.3-8
#> On multicore systems, we suggest use of future::plan("multiprocess") for faster post-MCMC computations.
#> Loading required package: boot
#> Loading required package: BradleyTerry2
#> Loading required package: broom
#> Loading required package: callr
#> Loading required package: caret
#> Loading required package: lattice
#>
#> Attaching package: 'lattice'
#> The following object is masked from 'package:boot':
#>
#> melanoma
#> Loading required package: ggplot2
#> Loading required package: checkmate
#> Loading required package: cli
#> Loading required package: clipr
#> Welcome to clipr. See ?write_clip for advisories on writing to the clipboard in R.
#> Loading required package: cmprsk
#> Loading required package: survival
#>
#> Attaching package: 'survival'
#> The following object is masked from 'package:caret':
#>
#> cluster
#> The following object is masked from 'package:boot':
#>
#> aml
#> Loading required package: colorspace
#> Loading required package: correlation
#>
#> Attaching package: 'correlation'
#> The following object is masked from 'package:lavaan':
#>
#> cor2cov
#> Loading required package: covr
#> Loading required package: cowplot
#>
#> ********************************************************
#> Note: As of version 1.0.0, cowplot does not change the
#> default ggplot2 theme anymore. To recover the previous
#> behavior, execute:
#> theme_set(theme_cowplot())
#> ********************************************************
#> Loading required package: crayon
#>
#> Attaching package: 'crayon'
#> The following object is masked from 'package:ggplot2':
#>
#> %+%
#> Loading required package: Cubist
#> Loading required package: curl
#> Loading required package: data.table
#> Loading required package: DBI
#> Loading required package: desc
#> Loading required package: devtools
#> Loading required package: usethis
#> Loading required package: digest
#> Loading required package: e1071
#> Loading required package: earth
#> Loading required package: Formula
#> Loading required package: plotmo
#> Loading required package: plotrix
#> Loading required package: TeachingDemos
#> Loading required package: effectsize
#> Loading required package: ellipse
#>
#> Attaching package: 'ellipse'
#> The following object is masked from 'package:graphics':
#>
#> pairs
#> Loading required package: ellipsis
#> Loading required package: evaluate
#>
#> Attaching package: 'evaluate'
#> The following object is masked from 'package:assertthat':
#>
#> is.error
#> Loading required package: exactRankTests
#> Package 'exactRankTests' is no longer under development.
#> Please consider using package 'coin' instead.
#> Loading required package: explore
#>
#> Attaching package: 'explore'
#> The following object is masked from 'package:covr':
#>
#> report
#> Loading required package: fansi
#> Loading required package: farver
#> Loading required package: fastICA
#> Loading required package: forcats
#> Loading required package: foreach
#> Loading required package: gam
#> Loading required package: splines
#> Loaded gam 1.16.1
#> Loading required package: generics
#>
#> Attaching package: 'generics'
#> The following object is masked from 'package:evaluate':
#>
#> evaluate
#> The following object is masked from 'package:e1071':
#>
#> interpolate
#> The following object is masked from 'package:caret':
#>
#> train
#> The following objects are masked from 'package:base':
#>
#> as.difftime, as.factor, as.ordered, intersect, is.element, setdiff,
#> setequal, union
#> Loading required package: GGally
#> Registered S3 method overwritten by 'GGally':
#> method from
#> +.gg ggplot2
#>
#> Attaching package: 'GGally'
#> The following object is masked from 'package:explore':
#>
#> rescale01
#> Loading required package: ggpubr
#> Loading required package: magrittr
#>
#> Attaching package: 'ggpubr'
#> The following object is masked from 'package:cowplot':
#>
#> get_legend
#> Loading required package: ggrepel
#> Loading required package: ggsci
#> Loading required package: ggsignif
#> Loading required package: ggstatsplot
#> Registered S3 methods overwritten by 'broom.mixed':
#> method from
#> augment.lme broom
#> augment.merMod broom
#> glance.lme broom
#> glance.merMod broom
#> glance.stanreg broom
#> tidy.brmsfit broom
#> tidy.gamlss broom
#> tidy.lme broom
#> tidy.merMod broom
#> tidy.rjags broom
#> tidy.stanfit broom
#> tidy.stanreg broom
#> Registered S3 methods overwritten by 'car':
#> method from
#> influence.merMod lme4
#> cooks.distance.influence.merMod lme4
#> dfbeta.influence.merMod lme4
#> dfbetas.influence.merMod lme4
#> Loading required package: glue
#> Loading required package: grid
#> Loading required package: gridExtra
#> Loading required package: gtable
#> Loading required package: here
#> here() starts at /Users/serdarbalciold/histopathRprojects/ClinicoPath
#> Loading required package: highr
#> Loading required package: Hmisc
#>
#> Attaching package: 'Hmisc'
#> The following object is masked from 'package:explore':
#>
#> describe
#> The following objects are masked from 'package:TeachingDemos':
#>
#> cnvrt.coords, subplot
#> The following object is masked from 'package:e1071':
#>
#> impute
#> The following objects are masked from 'package:base':
#>
#> format.pval, units
#> Loading required package: hms
#> Loading required package: htmlTable
#> Loading required package: htmltools
#> Loading required package: htmlwidgets
#> Loading required package: httr
#>
#> Attaching package: 'httr'
#> The following object is masked from 'package:curl':
#>
#> handle_reset
#> The following object is masked from 'package:caret':
#>
#> progress
#> Loading required package: inline
#>
#> Attaching package: 'inline'
#> The following object is masked from 'package:htmltools':
#>
#> code
#> The following object is masked from 'package:Rcpp':
#>
#> registerPlugin
#> Loading required package: ipred
#> Loading required package: irr
#> Loading required package: lpSolve
#> Loading required package: iterators
#> Loading required package: janitor
#>
#> Attaching package: 'janitor'
#> The following objects are masked from 'package:stats':
#>
#> chisq.test, fisher.test
#> Loading required package: jomo
#> Loading required package: jpeg
#> Loading required package: jsonlite
#> Loading required package: kableExtra
#> Loading required package: kernlab
#>
#> Attaching package: 'kernlab'
#> The following object is masked from 'package:ggplot2':
#>
#> alpha
#> Loading required package: klaR
#> Loading required package: MASS
#>
#> Attaching package: 'MASS'
#> The following object is masked from 'package:BradleyTerry2':
#>
#> glmmPQL
#>
#> Attaching package: 'klaR'
#> The following object is masked from 'package:TeachingDemos':
#>
#> triplot
#> Loading required package: km.ci
#> Loading required package: KMsurv
#> Loading required package: knitr
#> Loading required package: labeling
#> Loading required package: latticeExtra
#>
#> Attaching package: 'latticeExtra'
#> The following object is masked from 'package:ggplot2':
#>
#> layer
#> Loading required package: lazyeval
#> Loading required package: lifecycle
#> Loading required package: lme4
#> Loading required package: Matrix
#>
#> Attaching package: 'lme4'
#> The following object is masked from 'package:generics':
#>
#> refit
#> Loading required package: loo
#> This is loo version 2.2.0
#> - Online documentation and vignettes at mc-stan.org/loo
#> - As of v2.0.0 loo defaults to 1 core but we recommend using as many as possible. Use the 'cores' argument or set options(mc.cores = NUM_CORES) for an entire session.
#> Loading required package: lubridate
#>
#> Attaching package: 'lubridate'
#> The following object is masked from 'package:hms':
#>
#> hms
#> The following object is masked from 'package:here':
#>
#> here
#> The following objects are masked from 'package:data.table':
#>
#> hour, isoweek, mday, minute, month, quarter, second, wday, week,
#> yday, year
#> The following object is masked from 'package:cowplot':
#>
#> stamp
#> The following object is masked from 'package:base':
#>
#> date
#> Loading required package: markdown
#> Loading required package: matrixStats
#>
#> Attaching package: 'matrixStats'
#> The following object is masked from 'package:checkmate':
#>
#> anyMissing
#> Loading required package: maxstat
#> Loading required package: mda
#> Loading required package: class
#> Loaded mda 0.4-10
#> Loading required package: mgcv
#> Loading required package: nlme
#>
#> Attaching package: 'nlme'
#> The following object is masked from 'package:lme4':
#>
#> lmList
#> The following object is masked from 'package:glue':
#>
#> collapse
#> This is mgcv 1.8-31. For overview type 'help("mgcv-package")'.
#>
#> Attaching package: 'mgcv'
#> The following objects are masked from 'package:gam':
#>
#> gam, gam.control, gam.fit, s
#> Loading required package: mice
#>
#> Attaching package: 'mice'
#> The following objects are masked from 'package:base':
#>
#> cbind, rbind
#> Loading required package: mime
#> Loading required package: minqa
#> Loading required package: mitml
#> *** This is beta software. Please report any bugs!
#> *** See the NEWS file for recent changes.
#> Loading required package: mitools
#> Loading required package: mlbench
#> Loading required package: MLmetrics
#>
#> Attaching package: 'MLmetrics'
#> The following objects are masked from 'package:caret':
#>
#> MAE, RMSE
#> The following object is masked from 'package:base':
#>
#> Recall
#> Loading required package: ModelMetrics
#>
#> Attaching package: 'ModelMetrics'
#> The following objects are masked from 'package:caret':
#>
#> confusionMatrix, precision, recall, sensitivity, specificity
#> The following object is masked from 'package:bayestestR':
#>
#> auc
#> The following object is masked from 'package:base':
#>
#> kappa
#> Loading required package: MuMIn
#>
#> Attaching package: 'MuMIn'
#> The following object is masked from 'package:loo':
#>
#> loo
#> Loading required package: munsell
#>
#> Attaching package: 'munsell'
#> The following object is masked from 'package:colorspace':
#>
#> desaturate
#> Loading required package: mvtnorm
#> Loading required package: nFactors
#> Loading required package: psych
#>
#> Attaching package: 'psych'
#> The following object is masked from 'package:MLmetrics':
#>
#> AUC
#> The following object is masked from 'package:kernlab':
#>
#> alpha
#> The following object is masked from 'package:Hmisc':
#>
#> describe
#> The following object is masked from 'package:explore':
#>
#> describe
#> The following object is masked from 'package:plotrix':
#>
#> rescale
#> The following object is masked from 'package:crayon':
#>
#> %+%
#> The following object is masked from 'package:correlation':
#>
#> cor2cov
#> The following objects are masked from 'package:ggplot2':
#>
#> %+%, alpha
#> The following object is masked from 'package:boot':
#>
#> logit
#> The following object is masked from 'package:lavaan':
#>
#> cor2cov
#>
#> Attaching package: 'nFactors'
#> The following object is masked from 'package:lattice':
#>
#> parallel
#> Loading required package: nloptr
#>
#> Attaching package: 'nloptr'
#> The following objects are masked from 'package:minqa':
#>
#> bobyqa, newuoa
#> Loading required package: nnet
#>
#> Attaching package: 'nnet'
#> The following object is masked from 'package:mgcv':
#>
#> multinom
#> Loading required package: numDeriv
#> Loading required package: openssl
#>
#> Attaching package: 'openssl'
#> The following object is masked from 'package:digest':
#>
#> sha1
#> Loading required package: ordinal
#>
#> Attaching package: 'ordinal'
#> The following objects are masked from 'package:nlme':
#>
#> ranef, VarCorr
#> The following objects are masked from 'package:lme4':
#>
#> ranef, VarCorr
#> The following object is masked from 'package:kernlab':
#>
#> convergence
#> Loading required package: pamr
#> Loading required package: cluster
#> Loading required package: pan
#> Loading required package: party
#> Loading required package: modeltools
#> Loading required package: stats4
#>
#> Attaching package: 'modeltools'
#> The following object is masked from 'package:lme4':
#>
#> refit
#> The following object is masked from 'package:kernlab':
#>
#> prior
#> The following objects are masked from 'package:generics':
#>
#> fit, refit
#> Loading required package: strucchange
#> Loading required package: zoo
#>
#> Attaching package: 'zoo'
#> The following objects are masked from 'package:base':
#>
#> as.Date, as.Date.numeric
#> Loading required package: sandwich
#>
#> Attaching package: 'sandwich'
#> The following object is masked from 'package:generics':
#>
#> estfun
#> Loading required package: performance
#>
#> Attaching package: 'performance'
#> The following objects are masked from 'package:ModelMetrics':
#>
#> mse, rmse
#> The following object is masked from 'package:irr':
#>
#> icc
#> Loading required package: pillar
#>
#> Attaching package: 'pillar'
#> The following object is masked from 'package:mice':
#>
#> squeeze
#> The following object is masked from 'package:cli':
#>
#> style_bold
#> Loading required package: pkgbuild
#>
#> Attaching package: 'pkgbuild'
#> The following object is masked from 'package:devtools':
#>
#> build
#> Loading required package: pkgconfig
#>
#> Attaching package: 'pkgconfig'
#> The following object is masked from 'package:httr':
#>
#> set_config
#> Loading required package: pkgdown
#>
#> Attaching package: 'pkgdown'
#> The following object is masked from 'package:devtools':
#>
#> build_site
#> Loading required package: pkgload
#>
#> Attaching package: 'pkgload'
#> The following objects are masked from 'package:devtools':
#>
#> has_tests, load_all, package_file
#> Loading required package: plogr
#> Loading required package: pls
#>
#> Attaching package: 'pls'
#> The following object is masked from 'package:MuMIn':
#>
#> stdize
#> The following object is masked from 'package:caret':
#>
#> R2
#> The following object is masked from 'package:stats':
#>
#> loadings
#> Loading required package: plyr
#>
#> Attaching package: 'plyr'
#> The following object is masked from 'package:modeltools':
#>
#> empty
#> The following object is masked from 'package:matrixStats':
#>
#> count
#> The following object is masked from 'package:lubridate':
#>
#> here
#> The following objects are masked from 'package:Hmisc':
#>
#> is.discrete, summarize
#> The following object is masked from 'package:here':
#>
#> here
#> The following object is masked from 'package:ggpubr':
#>
#> mutate
#> The following object is masked from 'package:desc':
#>
#> desc
#> The following object is masked from 'package:BradleyTerry2':
#>
#> baseball
#> Loading required package: png
#> Loading required package: polynom
#> Loading required package: ppcor
#> Loading required package: praise
#> Loading required package: pROC
#> Type 'citation("pROC")' for a citation.
#>
#> Attaching package: 'pROC'
#> The following object is masked from 'package:ModelMetrics':
#>
#> auc
#> The following object is masked from 'package:colorspace':
#>
#> coords
#> The following objects are masked from 'package:bayestestR':
#>
#> auc, ci
#> The following objects are masked from 'package:stats':
#>
#> cov, smooth, var
#> Loading required package: purrr
#>
#> Attaching package: 'purrr'
#> The following object is masked from 'package:plyr':
#>
#> compact
#> The following objects are masked from 'package:lazyeval':
#>
#> is_atomic, is_formula
#> The following object is masked from 'package:kernlab':
#>
#> cross
#> The following object is masked from 'package:jsonlite':
#>
#> flatten
#> The following object is masked from 'package:magrittr':
#>
#> set_names
#> The following objects are masked from 'package:foreach':
#>
#> accumulate, when
#> The following object is masked from 'package:data.table':
#>
#> transpose
#> The following object is masked from 'package:caret':
#>
#> lift
#> Loading required package: RANN
#> Loading required package: RColorBrewer
#> Loading required package: RcppEigen
#> Loading required package: rlang
#>
#> Attaching package: 'rlang'
#> The following objects are masked from 'package:purrr':
#>
#> %@%, as_function, flatten, flatten_chr, flatten_dbl, flatten_int,
#> flatten_lgl, flatten_raw, invoke, list_along, modify, prepend,
#> splice
#> The following objects are masked from 'package:pkgload':
#>
#> ns_env, pkg_env
#> The following objects are masked from 'package:lazyeval':
#>
#> as_name, call_modify, call_standardise, expr_label, expr_text,
#> f_env, f_env<-, f_label, f_lhs, f_lhs<-, f_rhs, f_rhs<-, f_text,
#> is_atomic, is_call, is_formula, is_lang, is_pairlist, missing_arg
#> The following objects are masked from 'package:jsonlite':
#>
#> flatten, unbox
#> The following object is masked from 'package:magrittr':
#>
#> set_names
#> The following object is masked from 'package:data.table':
#>
#> :=
#> The following object is masked from 'package:crayon':
#>
#> chr
#> The following object is masked from 'package:assertthat':
#>
#> has_name
#> Loading required package: StanHeaders
#> Loading required package: tableone
#> Welcome to my package
#>
#> Attaching package: 'ClinicoPath'
#> The following object is masked from 'package:explore':
#>
#> report
#> The following object is masked from 'package:covr':
#>
#> report
#> The following object is masked from 'package:correlation':
#>
#> correlation
#> The following object is masked from 'package:survival':
#>
#> cluster
#> The following object is masked from 'package:cli':
#>
#> tree
#> The following object is masked from 'package:caret':
#>
#> clusterLinked repositories: histopathR, histopathology-template, ClinicoPathJamoviModule, histopathRshiny, clinicopathological, histopathRaddins
https://github.com/users/sbalci/projects/1
https://hub.docker.com/r/serdarbalci/clinicopathological
https://github.com/sbalci/ClinicoPathJamoviModule
This repository is a template for the codes I use in my and my friends’ histopathology research.
See examples
See some of the codes here: https://sbalci.github.io/histopathology-template/Report.html
You may also install histopathR package to get all the codes as R Markdown Template.
devtools::install_github("sbalci/histopathR")
rmarkdown::draft(file = "myfile",
template = "clinicopathological",
package = "histopathR",
create_dir = TRUE,
edit = TRUE)- I have tried to collect common codes in My R Codes For Data Analysis. I plan to collect them under the package histopathR gradually.
How to use
-
In RStudio:
Via Docker:
https://hub.docker.com/r/serdarbalci/clinicopathological
https://twitter.com/serdarbalci/status/1197849208302252032
- As a standalone app (for mac only):
https://sourceforge.net/projects/histopathr/
https://twitter.com/serdarbalci/status/1198348640294711296
- As a Shiny app:
Launch here: https://serdarbalci.shinyapps.io/histopathR/
Run in your own computer R session:
library(shiny)
runUrl("https://github.com/sbalci/histopathRshiny/raw/master/histopathRshiny.tar.gz")Code here: https://github.com/sbalci/histopathRshiny
- As a jamovi module:
Download module here:
https://github.com/sbalci/ClinicoPathJamoviModule/raw/master/ClinicoPath.jmo
https://github.com/sbalci/ClinicoPathJamoviModule
https://sourceforge.net/projects/clinicopathjamovimodule/
Recommended Links for Reproducible and ClinicoPathological Research
How to Prepare Data for Histopathology Research Presentation
“The Quartz guide to bad data”nın Türkçe çevirisi: Kötü Veri Kılavuzu
Please Give Me FeedBack
https://goo.gl/forms/YjGZ5DHgtPlR1RnB3
Histopathology Research Template 🔬
🔬👀📑🗃📊🏨🗄📇📖⚗📝🎶📈📉📃🖍 🔬🔬🏋🚴🚙👨💻 📸📺🎛🔭🔬💊🔐🍫🌸
https://sbalci.github.io/histopathology-template/
https://doi.org/10.5281/zenodo.3635430
https://github.com/sbalci/histopathology-template
This repository is a template for the codes I use in my and my friends’ histopathology research.
See examples
See some of the codes here: https://sbalci.github.io/histopathology-template/Report.html
You may also install histopathR package to get all the codes as R Markdown Template.
devtools::install_github("sbalci/histopathR")
rmarkdown::draft(file = "myfile",
template = "clinicopathological",
package = "histopathR",
create_dir = TRUE,
edit = TRUE)- I have tried to collect common codes in My R Codes For Data Analysis. I plan to collect them under the package histopathR gradually.
How to use
-
In RStudio:
Via Docker:
https://hub.docker.com/r/serdarbalci/clinicopathological
https://twitter.com/serdarbalci/status/1197849208302252032
- As a standalone app (for mac only):
https://sourceforge.net/projects/histopathr/
https://twitter.com/serdarbalci/status/1198348640294711296
- As a Shiny app:
Launch here: https://serdarbalci.shinyapps.io/histopathR/
Run in your own computer R session:
library(shiny)
runUrl("https://github.com/sbalci/histopathRshiny/raw/master/histopathRshiny.tar.gz")Code here: https://github.com/sbalci/histopathRshiny
- As a jamovi module:
Download module here:
https://github.com/sbalci/ClinicoPathJamoviModule/raw/master/ClinicoPath.jmo
https://github.com/sbalci/ClinicoPathJamoviModule
https://sourceforge.net/projects/clinicopathjamovimodule/
Recommended Links for Reproducible Research
How to Prepare Data for Histopathology Research Presentation
“The Quartz guide to bad data”nın Türkçe çevirisi: Kötü Veri Kılavuzu
Please Give Me FeedBack
https://goo.gl/forms/YjGZ5DHgtPlR1RnB3
🔬🔬🔬🔬🔬
UNDER CONSTRUCTION 🛠⛔️⚠️🔩
Follow @serdarbalci
{% if page.comments %}
{% endif %}
A work by Serdar Balci
Histopathology Research Template 🔬
🔬👀📑🗃📊🏨🗄📇📖⚗📝🎶📈📉📃🖍 🔬🔬🏋🚴🚙👨💻 📸📺🎛🔭🔬💊🔐🍫🌸
https://sbalci.github.io/histopathology-template/
https://doi.org/10.5281/zenodo.3635430
https://github.com/sbalci/histopathology-template
This repository is a template for the codes I use in my and my friends’ histopathology research.
See examples
See some of the codes here: https://sbalci.github.io/histopathology-template/Report.html
You may also install histopathR package to get all the codes as R Markdown Template.
devtools::install_github("sbalci/histopathR")
rmarkdown::draft(file = "myfile",
template = "clinicopathological",
package = "histopathR",
create_dir = TRUE,
edit = TRUE)- I have tried to collect common codes in My R Codes For Data Analysis. I plan to collect them under the package histopathR gradually.
How to use
-
In RStudio:
Via Docker:
https://hub.docker.com/r/serdarbalci/clinicopathological
https://twitter.com/serdarbalci/status/1197849208302252032
- As a standalone app (for mac only):
https://sourceforge.net/projects/histopathr/
https://twitter.com/serdarbalci/status/1198348640294711296
- As a Shiny app:
Launch here: https://serdarbalci.shinyapps.io/histopathR/
Run in your own computer R session:
library(shiny)
runUrl("https://github.com/sbalci/histopathRshiny/raw/master/histopathRshiny.tar.gz")Code here: https://github.com/sbalci/histopathRshiny
- As a jamovi module:
Download module here:
https://github.com/sbalci/ClinicoPathJamoviModule/raw/master/ClinicoPath.jmo
https://github.com/sbalci/ClinicoPathJamoviModule
https://sourceforge.net/projects/clinicopathjamovimodule/
Recommended Links for Reproducible Research
How to Prepare Data for Histopathology Research Presentation
“The Quartz guide to bad data”nın Türkçe çevirisi: Kötü Veri Kılavuzu
Please Give Me FeedBack
https://goo.gl/forms/YjGZ5DHgtPlR1RnB3
🔬🔬🔬🔬🔬
UNDER CONSTRUCTION 🛠⛔️⚠️🔩
Follow @serdarbalci
{% if page.comments %}
{% endif %}
A work by Serdar Balci